3W Filterless Class D Audio Amplification Technology Based on TPA2028D1

3W Filterless Class D Audio Amplification Technology Based on TPA2028D1

TI's TPA2028D1 is a mono 3W filterless Class D audio power amplifier with integrated volume control, dynamic range compression (DRC) and automatic gain control (AGC). The DRV / AGC function can be programmed via a digital I2C interface. 5V The power supply can provide 3W power (THD + N is 10%) to a 4 ohm load, the operating voltage is from 2.5 V to 5.5 V, the operating current is 1.8 mA, and the shutdown current is 0.2 uA. It is mainly used in wireless or cellular phones and PDA, PND , DVD players, notebook computers, portable radios and game consoles, and educational toys. This article introduces the main features of TPA2028D1, functional block diagram, indicator test block diagram, and TPA2028D1YZFEVM evaluation board performance, circuit diagram and bill of materials (BOM)

The TPA2028D1 is a mono, filter-free Class-D audio power amplifier with volume control, dynamic range compression (DRC) and automaTIc gain control (AGC). It is available in a 1,63 mm x 1,63 mm wafer chip- scale package (WCSP).

The DRC / AGC funcTIon in the TPA2028D1 is programmable via a digital I2C interface. The DRC / AGC funcTIon can be configured to automatically prevent distortion of the audio signal and enhance quiet passages that are normally not heard. The DRC / AGC can also be configured to protect the speaker from damage at high power levels and compress the dynamic range of music to fit within the dynamic range of the speaker. The gain can be selected from –28 dB to +30 dB in 1-dB steps.

TPA2028D1 main features:

Fast AGC Start-up Time: 5 ms

Pin-out Compatible with TPA2018D1

Filter-Free Class-D Architecture

3 W Into 4 at 5 V (10% THD + N)

880 mW Into 8 at 3.6 V (10% THD + N)

Power Supply Range: 2.5 V to 5.5 V

Flexible Operation With / Without I2C

Programmable DRC / AGC Parameters

Digital I2C Volume Control

Selectable Gain from –28 dB to 30 dB in 1-dB Steps (when compression is used)

Selectable Attack, Release and Hold Times

4 Selectable Compression Ratios

Low Supply Current: 1.8 mA

Low Shutdown Current: 0.2 µA

High PSRR: 80 dB

AGC Enable / Disable Function

Limiter Enable / Disable Function

Short-Circuit and Thermal Protection

Space-Saving Package

1,63 mm × 1,63 mm Nano-Free WCSP (YZF)

TPA2028D1 application:

• Wireless or Cellular Handsets and PDAs

• Portable Navigation Devices

• Portable DVD Player

• Notebook PCs

• Portable Radio

• Portable Games

• Educational Toys

• USB Speakers

Figure 1. TPA2028D1 functional block diagram

Figure 2. TPA2028D1 indicator test block diagram

Figure 3. TPA2028D1 simplified application block diagram

TPA2028D1YZFEVM Evaluation Board

The TPA2028D1 evaluation module (EVM) is a complete, stand-alone audio board. It contains the TPA2028D1 WCSP (YZF) Class-D audio power amplifier.

TPA2028D1YZFEVM evaluation board indicators:



Figure 4. TPA2028D1YZFEVM evaluation board outline drawing

Figure 5. TPA2028D1YZFEVM evaluation board circuit diagram (1)

Figure 6. TPA2028D1YZFEVM evaluation board circuit diagram (2)

TPA2028D1YZFEVM Evaluation Board Bill of Materials (BOM):

USB 2.0 Hubs

USB 2.0 is a USB interface standard released in 2000 with a theoretical maximum transmission speed of 480Mbps (about 60MB/s). The port has four cables (five cables for MicroUSB and MiniUSB), and the maximum output current is 0.5A. USB 2.0 is currently the most common version of USB port, almost all computers have USB 2.0 port, most USB devices also support USB 2.0. USB 2.0 hub. The device can provide USB high speed or full speed connection on the uplink port. The device also provides USB high-speed, full-speed, or low-speed connections on the downlink port. When the uplink port is connected to an electrical environment that supports only high-speed, full-speed, and low-speed connections, the high-speed, full-speed, and low-speed USB connections on the downlink port are enabled. When the uplink port is connected to an electrical environment that supports only full or low speed connections, the USB high-speed connection on the downlink port is disabled. USB 3.0 Hubs is higher than usb 2.0 in terms of transmitting data.



04

Usb 2.0 Hubs,7 Port Usb 2.0 Hub,Wireless Usb 2.0 Hub,Usb C To Usb 2.0 Hub

Henan Yijiao Trading Co., Ltd , https://www.yjusbcable.com

This entry was posted in on