Then where does the problem lie? The landlord thinks that many people have good maintenance, and that it is the wrong way to use it. Because everyone thinks that the TV box is just such a small thing, it is not very expensive. When the power supply is connected, it is lost in a convenient corner. The market doesn't matter, or often the wire pulls the wire to toss its body, because the box is small, How much technical content wood, so it can not afford to toss ah!
The TV box is wrong to use method 1. Remote control board a key standby, does not turn off the power
Needless to say, look at your TV or box's power button and patch panel to know how long you have had the wood closed manually. Everyone is accustomed to the press of a remote control panel to keep the box and TV in standby. Occasionally, this is nothing, but the frequency is frequent, and there is no need to be in standby for several months. The damage to the box is very large because it still consumes electricity.
The correct approach is to turn off the TV power and then unplug the TV box adapter.
TV Box Incorrect Usage 2. Pull Memory Card or USB Disk During Use
This is similar to the “hot plugging†used in mobile phones. Many people have realized that when using a box as a local application, unplugging the memory card or USB stick in use is actually very harmful.
In particular, when looking at the local video with the amount of memory, the removal of the memory card will damage the main board of the box and cause the system to crash. The box will naturally be stuck.
The correct method is to exit the video and then remove the memory card or USB stick.
The TV box is wrong to use 3. Always put the TV box next to the high-power appliances
High-power electrical appliances are a source of heat radiation, and at the same time, they are electromagnetic transmitters. Such as stereos are simply bulldozer-level; the placement of boxes is not only unfavorable to heat dissipation, but also affects WIFI. At this time, a splash screen may appear. Caton phenomenon. The above picture is the most should not be placed, I fear that his TV box will explode. . .
TV Box Incorrect Use 4. Frequent Plug and Play TV Box Interfaces
Frequent plugging and unplugging may cause poor contact or damage to the interface, and may also cause dust to enter and affect the normal operation of the box. In fact, this situation is relatively small, in addition to the landlord in the work of such a TV box will be the case, but it is worth talking about, because enthusiasts often plug, well, the landlord can only say, gentle point, brother!
TV Box Incorrect Usage Method 5. Use in unstable power output environment
Now is not the 80's, when a light bulb feels that the light bulb is suffering, and it's incessant, in fact, it is voltage instability, and now home power is 220V, the voltage is stable.
However, this problem should actually be more prudent. If you look at the current plugboard market, you'll know that it's all about security and stability. However, the landlord seems to think that even if there are too many electrical outlets, then there are too many appliances. .
The landlord recommends that you do not buy cheap, buy a good patch panel, and insert the TV box plug-in board do not insert too many appliances. I have seen several friends who bought a plug-in board at home to plug in 10 electrical appliances. Then they are often full on the top. It's very simple. Calculate your TV boxes, TVs, and other supporting electrical equipment. Buy just enough plug-in board. Where, then, when you are not looking for a patch panel, you can put it in and find it again!
The TV box is incorrectly used 6. Put the TV box in a greasy, damp environment
This does not need to say that it is very difficult for people to go through a damp, greasy environment, not to mention a small TV box. In this environment, but its main board metal sheet is still very fragile, rusty corrosion will not only affect the normal use, the service life will be much shorter.
The TV box is incorrectly used 7. Cover the TV box or place the TV box in a hidden corner
With the principle of wireless routing is similar, the wrong place, too many things covered, the TV box signal has an impact, the same reason, put too far will affect the signal, Caton, splash screen is also very easy to appear.
The TV box is wrong to use 8. Do not clean the TV box for a long time. Excessive software or junk files
This is not a technical issue. It is just a habit. You use your mobile phone to clean up junk files. The TV box is the same. You want to use the box and clean it up every day. You can delete all the uncommonly used and identical software.
There are currently five boxes on the landlord's hand, all of which have been used for more than one year. There is nothing wrong with this, and the oldest one is for this one.
TV Box Misuse Method 9. The TV is too old
The TV box card is not necessarily the problem of the TV box. The influence of the TV cannot be ignored. The aging of the TV affects the output of the image quality and affects the signal reception. Use the HDMI HD cable when using a TV box. This is a conservative and stable method.
If you think wiring is a hassle, there is another way to use the recently emerged wireless projection software, AirPC, to pass the screen on your computer intact to the TV. The live broadcast resources that the television box can't see are directly searched on the computer, and then it is transmitted to the TV screen on the AirPC. The TV box takes on the role of picking in and out. Even if the TV box or TV is too old, it doesn't matter because this It is a projection technology developed by using the H265 codec technology. Compared with the traditional projection or wireless projection, its nature is completely different. Of course, it still depends on the basic functions of the TV box.
The TV box is wrong to use method 1. Remote control board a key standby, does not turn off the power
Needless to say, look at your TV or box's power button and patch panel to know how long you have had the wood closed manually. Everyone is accustomed to the press of a remote control panel to keep the box and TV in standby. Occasionally, this is nothing, but the frequency is frequent, and there is no need to be in standby for several months. The damage to the box is very large because it still consumes electricity.
The correct approach is to turn off the TV power and then unplug the TV box adapter.
TV Box Incorrect Usage 2. Pull Memory Card or USB Disk During Use
This is similar to the “hot plugging†used in mobile phones. Many people have realized that when using a box as a local application, unplugging the memory card or USB stick in use is actually very harmful.
In particular, when looking at the local video with the amount of memory, the removal of the memory card will damage the main board of the box and cause the system to crash. The box will naturally be stuck.
The correct method is to exit the video and then remove the memory card or USB stick.
The TV box is wrong to use 3. Always put the TV box next to the high-power appliances
High-power electrical appliances are a source of heat radiation, and at the same time, they are electromagnetic transmitters. Such as stereos are simply bulldozer-level; the placement of boxes is not only unfavorable to heat dissipation, but also affects WIFI. At this time, a splash screen may appear. Caton phenomenon. The above picture is the most should not be placed, I fear that his TV box will explode. . .
TV Box Incorrect Use 4. Frequent Plug and Play TV Box Interfaces
Frequent plugging and unplugging may cause poor contact or damage to the interface, and may also cause dust to enter and affect the normal operation of the box. In fact, this situation is relatively small, in addition to the landlord in the work of such a TV box will be the case, but it is worth talking about, because enthusiasts often plug, well, the landlord can only say, gentle point, brother!
TV Box Incorrect Usage Method 5. Use in unstable power output environment
Now is not the 80's, when a light bulb feels that the light bulb is suffering, and it's incessant, in fact, it is voltage instability, and now home power is 220V, the voltage is stable.
However, this problem should actually be more prudent. If you look at the current plugboard market, you'll know that it's all about security and stability. However, the landlord seems to think that even if there are too many electrical outlets, then there are too many appliances. .
The landlord recommends that you do not buy cheap, buy a good patch panel, and insert the TV box plug-in board do not insert too many appliances. I have seen several friends who bought a plug-in board at home to plug in 10 electrical appliances. Then they are often full on the top. It's very simple. Calculate your TV boxes, TVs, and other supporting electrical equipment. Buy just enough plug-in board. Where, then, when you are not looking for a patch panel, you can put it in and find it again!
The TV box is incorrectly used 6. Put the TV box in a greasy, damp environment
This does not need to say that it is very difficult for people to go through a damp, greasy environment, not to mention a small TV box. In this environment, but its main board metal sheet is still very fragile, rusty corrosion will not only affect the normal use, the service life will be much shorter.
The TV box is incorrectly used 7. Cover the TV box or place the TV box in a hidden corner
With the principle of wireless routing is similar, the wrong place, too many things covered, the TV box signal has an impact, the same reason, put too far will affect the signal, Caton, splash screen is also very easy to appear.
The TV box is wrong to use 8. Do not clean the TV box for a long time. Excessive software or junk files
This is not a technical issue. It is just a habit. You use your mobile phone to clean up junk files. The TV box is the same. You want to use the box and clean it up every day. You can delete all the uncommonly used and identical software.
There are currently five boxes on the landlord's hand, all of which have been used for more than one year. There is nothing wrong with this, and the oldest one is for this one.
TV Box Misuse Method 9. The TV is too old
The TV box card is not necessarily the problem of the TV box. The influence of the TV cannot be ignored. The aging of the TV affects the output of the image quality and affects the signal reception. Use the HDMI HD cable when using a TV box. This is a conservative and stable method.
If you think wiring is a hassle, there is another way to use the recently emerged wireless projection software, AirPC, to pass the screen on your computer intact to the TV. The live broadcast resources that the television box can't see are directly searched on the computer, and then it is transmitted to the TV screen on the AirPC. The TV box takes on the role of picking in and out. Even if the TV box or TV is too old, it doesn't matter because this It is a projection technology developed by using the H265 codec technology. Compared with the traditional projection or wireless projection, its nature is completely different. Of course, it still depends on the basic functions of the TV box.
LED Corn Light Co., Ltd. , http://www.cnoutdoorlight.com