According to the report of DIGITIMES Research, with the decreasing power consumption of cold cathode tube (CCFL) LCD TVs and non-environmental materials, Japanese TV brand players are beginning to push LED-backlit LCD TVs, as well as built-in video and networking. A new LCD TV product.
According to DIGITIMES Research, Japan has promoted the Eco Point policy since mid-May 2009 and successfully promoted Japanese thin TV buying. Because the Eco Point policy requires people to purchase thin TVs that meet the energy-saving benchmarks of Japan's fiscal year 2008, they can apply for feedback points. Therefore, the major brands of Japanese thin-screen TVs have pushed LCD TVs more or better than Eco Point since mid-May 2009. The energy saving standard set.
However, Du Zhenyu, an analyst at DIGITIMES Research, said that the major brands of thin TVs in Japan have been pushing the LCD TVs since the middle of May 2009, and the CCFL-type LCD TVs are still the mainstay. Less, and CCFL non-environmental materials, prompted the major brands of Japanese thin TVs to start pushing LED-backlit LCD TVs in the 2009 LCD TV winter business war in Japan.
Du Zhenyu further explained that the main LED TV brands in Japan pushed the new LED TV products at the end of the year. It is known that the focus is not the same. Sharp has lowered the price and has not adopted regional control for its direct LED TV products. (Local Dimming Technology, and other ways to improve the contrast and reaction rate; Sony side-lit LED TV new products in the backlight module? Single-sided LED configuration to achieve a wall-mounted ultra-thin appearance; Toshiba (Toshiba) direct-lit LED TV New products continue to use regional control technology to enhance comparison.
In addition, both Sharp and Toshiba have launched new LCD TVs with video functions. Among them, Sharp is equipped with Blu-ray recorders on LCD TVs, Toshiba is built-in or external HDDs, and Sharp and Toshiba video features new LCD TVs. With the networking function, it can be seen that the major brands of LCD TVs in Japan have improved the added value of LCD TVs.
Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Built-in 3.6V rechargeable Batteries ( . The purpose of the batteries is to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,
press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from
one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current power which ranges in 0.0W 〜 9999W. LCD on third line displays the current electricity costs which ranges in O.Ocost 〜 9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which
means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000KWH 〜 9999KWH without other figures. LCD on third line displays"DAY"- "1 'Will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untill the maximal cumulative time of 9999 days.
Mode 3: TimeA^bltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V 〜 9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ 〜 9999Hz without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.LCD on second line displays load current which ranges in 0.0000A 〜 9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 LOOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 dones. LCD on
second line displays the minimum power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: Time/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the''OVERLOAD[ with booming noise to warn the users,( 1918928,selectable choice)
Supplemental informations:
1: Except [OVERLOAD[ interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&"Down" are in no function under un-setting mode.
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device
has entered the setting mode. After that, press FUNCTION for swithing , then press "UP"and "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.
LCD Display Power Meter Socket,Power Meter Plug Outlet,Electricity Usage Monitor Socket,LCD Energy Power Meter Socket,Digital LCD Power Meter Socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com