“The advantages of resistive drive technology are low cost, ease of design, and no EMC issues,†explains Asif Jakwanl, director of market and applications for the Small Signals Division of the ON Semiconductor Standards Group. “But the downside is that the brightness of LEDs depends on the battery voltage. The brightness varies with voltage, and the potential danger is that the LED lamp may burn out. In addition, its shortcomings include the need for proper LED coding, low conversion efficiency, and inventory pressure for customers. However, due to resistance The low cost of the drive and its ease of design are still among the more popular LED drive technologies.
For linear regulator drive technology, AsifJakwanl said its advantages are also easy to design, no electromagnetic compatibility problems, compared to resistive drive, it also adds steady current and overcurrent protection, with an external current set point. However, its disadvantage is that it is more expensive than the former, there will be power dissipation, and the efficiency is relatively low.
As for the switching regulator type, it is a popular driving technology in recent years. It has high efficiency, LED brightness is controllable, and has nothing to do with voltage, but its disadvantage is that the cost is much more expensive than the former two, and the design is complicated. The problem is that there is electromagnetic interference. "Some applications are sensitive to electromagnetic interference, such as in cars. For cars, interference from LED drivers can affect the car's audio and video reception, so switching regulators are not necessarily suitable for all applications," he said. However, in some high current applications, due to the high efficiency of the switch drive, it is still the first dizzy
"This proposed linear constant current regulator (CCR), two-terminal and three-terminal linear constant current regulator is a simple and lower cost solution compared to linear and switching regulators, but also better than resistors. The performance has been greatly improved." AsifJakwanl pointed out that "the technology is an exclusive patented technology of ON Semiconductor, which has been patented and is pending." The cost of the CCR solution is between the resistive and linear regulators.
The CCR features constant current and supports a maximum operating voltage of 45V, which is especially suitable for unstable automotive taillight voltages. Advantages of CCR include: constant brightness over a wide voltage range, protection of the LED from overdrive when the input voltage is high, brighter LEDs at lower input voltages, or reduced LED code inventory (because there is no need to match different voltages) LED light).
Compared with switching regulators, there is no EMI problem due to the absence of switches, making the design simple and easy. CCR is a double-ended drive. LEDs can be placed on top or bottom, which also makes the design simple. In addition, there is no need to surround components, and switching regulators require more peripheral components. “CCR is a low-cost line regulator. At the same time, because it eliminates LED coding and reduces the cost of resistor inventory, the overall system cost is lower,†said Asif Jakwan.
In terms of application, AsifJakwan recommends that CCR is the best choice below 50mA. Switching regulators are still the better choice when larger currents are required. In addition to the automotive LED lighting mentioned above, commercial signs and architectural lighting are all very suitable applications for CCR.
The production process of a machine is the whole process of making a product from a raw material (or semi-finished product). For machine production, it includes the transportation and preservation of raw materials, preparation for production, the manufacture of blank, the processing and heat treatment of parts, the assembly and debugging of products, paint and packaging. The content of production process is very extensive. Modern enterprises use the principles and methods of systems engineering to organize production and guide production, and regard the production process as a production system with input and output.
The technological process
The technological process
In the production process, the process of changing the shape, size, position and nature of the production object, so that it becomes a finished product or semi-finished product is called the technological process. It is an essential part of the production process. Process: casting, forging, stamping, welding, machining, assembly processes, such as machinery manufacturing process generally refers to the part machining process and machine of the sum of the assembly process, other process is known as the auxiliary process, such as transportation, storage, power supply, equipment maintenance, etc. The technological process is composed of one or several sequential processes, and a process is composed of several working steps.
Working procedure is the basic unit of mechanical processing process. The so-called process refers to a (or a group of) workers, in a machine tool (or a working place), on the same workpiece (or at the same time to several workpiece) of the continuous completion of that part of the process. The main characteristic of a process is that it does not change the processing object, equipment and operator, and the content of the process is continuously completed.
Precision Cnc Machining,Cnc Machining Parts,Custom Cnc Machining,Precision Cnc Turning Parts
Tianhui Machine Co.,Ltd , https://www.thcastings.com