In an era where everything likes to be fast, various electronic products will be replaced quickly, and prices will be cut fast. Even the power of various devices such as mobile phones and tablets will be used quickly, but the opposite is true - charging is not fast.
Sometimes, we prefer to use high-power power adapters to charge smart devices such as mobile phones and tablets. In return, the loss of the battery is even greater. ORICO recently launched a QTW Qualcomm 3.0 single-port USB plug charger, which is said to be able to store 80% of the power in 35 minutes. So high-profile, how easy to use, or not?
 Appearance, ORICO uses a paper box, the surface of a layer of film to prevent overheating, the overall use of white as a background color. On the front left corner of the front side is printed the black ORICO lettering and the picture of this expansion charger; on the back of the outer packaging, there are many parameters such as the product model, function features, and output power, and some manufacturers' information.
Of course, the exquisite packaging does not mean that the product is good or bad, perhaps for the marketing aspect, the external packaging can arouse the attention of the consumers, but for the product, it is the life of the product that pays attention to the internal product. This charging plug has black and white colors, I prefer this black, because it looks more tasteful. There is not much redundancy in the accessories, only the instructions and warranty card and an Android data cable about 1 meter long. Both the data cable and the adapter plug can be separated.
From the appearance point of view, ORICO inherits the simple concept that has always been used, the material used on the PC + ABS (flame-retardant fuel) material, the surface has a matte texture, the middle of the printed white ORICO words, at least from the front also looks Considered law-abiding.
Its appearance is square, size is 48mm48mm22mm, the size is similar to the country's iPhone mobile phone charger plug, but the iPhone mobile phone charger plug is vertical, and ORICO is horizontal, relatively occupy socket space will be more Something bigger, but I tried it on the Bulls row and it wouldn't affect the plugs in other locations, but for a 5-hole socket it would seem to be stretched.
It is reported that this QC3.0 uses the "voltage intelligent negotiation" algorithm, according to the state of the charge, so that the charging voltage can be changed by one step in 200mV increments, allowing the phone to get the right voltage, so as to achieve the expected charging current . It has DC 3.6-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A 18W Max on the output, and AC 100-240V 50/60Hz 0.5A Max on the input. It should be said that this adapter can achieve a free output and achieve the best power at 3.6-20V.
On the side of this adapter, which is the bottom or top of the charging, there is a USB port, the interface next to the 3.0 high-pass fast charging technology in white font. With intelligent identification IC, using the United States MPS synchronous rectification technology and line voltage drop compensation. In other words, it can achieve the battery life loss caused by rapid charging, reduce the heat of the charger, making the power conversion efficiency as high as 85%, but also to ensure that the aging of the wire will affect the charging performance. However, I always feel that any charging plug of engineering plastic materials will inevitably generate heat. It is nothing more than the size of the heat in the same period of time. However, I use this plug and the iPhone's plug to give Android and Apple's mobile phones the actual Using it as a comparison, there is fever but it is relatively low.
Close up.
The bottom surface is a foldable plug, and the plug's place is somewhat protruding. Supporting a wide voltage of 100-240V, the design of the plug is more user-friendly and it is quite convenient to carry.
This fast-charged adapter defaults to 5V for mobile phones and tablets that do not support the fast-charge 3.0 feature. Only when the device supports Qualcomm Quick Charger 3.0, does it automatically activate the fast-charge feature and Pressure.
The ORICO word is printed on the USB interface of the data cable, and is also a self-produced data cable that supports large currents. Its length is about one meter.
Renderings.
This QC3 has an eight-fold protection mechanism against over-current, surge, over-voltage, and short-circuit, providing protection for charging. Under normal circumstances, in a matter of half an hour, you can charge 80% of a typical mobile phone. In fact, this concept is relatively vague, but in fact, Quick Charge3.0 is faster than QC2.0. Can increase about 27%, but also can reduce the power loss up to 45%, it should be said that the charging speed is still very good.
At least I personally feel that this black-colored adapter is quite compatible with the colors of different mobile phones.
This OCICO charging plug that incorporates QC 3.0 high-pass fast charging technology has a relatively stable appearance; it is able to quickly identify the IC and quickly increase the power of the mobile phone in a short period of time save us a lot of time. It is worth mentioning that its protective mechanism is safer to use and no longer has to worry about accidents caused by plugs.
Of course, for mobile phones and tablet devices that don't support fast charging, this adapter is also a "cute woman who can't be without rice," and can only support up to 5V. The so-called radish vegetables are all good, after all, everyone has their own different views. As far as I am concerned, it has a good face value and is easy to carry. It is also a pleasure to occasionally try to experience and share the fun of black technology. Therefore, we are also looking forward to ORICO's QTW Qualcomm QC 3.0 single-port fast charge plug charger will have a better prospect.