Your own configuration:
CPU: Intel I5 6600K
Motherboard: Biostar GAMING Z170T
Memory: Genius GENUINE Series DDR3 2400 4GBx2
SSD: Plextor PLEXTOR M6V Series 128G
Graphics: Sapphire HD7750 Ultimate Silent
Chassis: Cooler Master Scout II Side Transparency
Radiator: Kyushu Fengshen Water Element 120
Power supply: Zhenhua rated 650W LEADEX G 650
Seeing this configuration, the graphics card must be sprayed. But what card do you buy now? 970?980?390? Not a new card, it is better to prepare the old yellow Pascal new card, and other reasonable prices into it. If you don't get a new card, the old card will have a bad price. 7750 first light it, and this card is also considered a collector's edition, passive cooling, the old yellow camp has not dared to issue this kind of card, fans stop what, there is no fan ah!!!
Suddenly found that the recent motherboard graphics rarely have a blue system, and more and more red gaming/game/gamer, etc., but the red look really tired for a long time, it is better to a classic black and white color it.
The chassis is a little nostalgic: Scout II, of course, recently cool and "refurbished", I feel this chassis has always been a good shape.
Size: Length 513 x Width 230 x Height 517.5mm, Middle Tower, Width up to 230mm, Compatible with Radiator; Thickness up to 0.8mm, Material can be assured.
The white paint of the steel plate has some matt effect, and it feels good when touched.
Both sides of the side panel have a raised design, the back can have a larger back space
Chassis panel is a standard cool hole flow, iron mesh punching design, contains a dust net, the chassis has three 5.25-inch optical drive position, considered an old design, and its implementation can indeed stay less in the inch drive .
The rear of the chassis: a 120mm fan hole, 7 PCI expansion slots, and an expansion bracket next to it. This baffle can also be used for winding.
However, the main 7 PCI baffles have no mesh and they have a small effect on heat dissipation.
At the bottom of the chassis, the power inlet has a removable dust-proof net, and a 12cm fan can be installed in front of it. This eliminates the need for a dust-proof net.
The handle at the top of the chassis is still very military-like, and it is also useful for movement. The handle is wrapped with rubber and the skin feel
I/O area on the top of the chassis, hidden design, there is a sliding cover protection, can be dust-free when not in use;
The I/O area has two USB 3.0 interfaces, two USB 2.0 interfaces, and a set of audio interfaces.
Power switch button and restart button are also on the top of the chassis, there is a fan light switch control button
There are two fan positions on the top of the chassis, with a removable dustproof net, which can hold two 12cm fans, but it cannot hold 240 rows, and it will conflict with the motherboard.
The width of the chassis reaches 230mm, which can accommodate CPU heatsinks up to 160mm;
For the graphics card, since the corresponding front has no hard disk, it can support a length of 400mm.
The space on the back of the chassis is about 2cm, but due to the protruding sideboard, there should be about 1cm more.
Zhenhua LEADEX G series, white, rated 650W, the card is not a problem.
Because the above graphics card is passive cooling, so the power fan is up, help the graphics card cooling it!
Platform is installed into the chassis
Kyushu Fengshen water elements 120 water-cooled, skylake's u temperature is relatively low, do not do the limit overclocking, 120 water can also hold live.
The graphics card is also put in, although it is only 7750, but the huge radiator should increase its confidence.
To install the front fan, you have to remove the front panel. This location is equipped with two 12cm fans. Due to the length, the 240 cold row can't fit. The scouts' chassis is not suitable for water cooling.
All installed, ready to light.
Light up successfully!
The keyboard also comes in vain
Waiting for Pascal to first light pollution
