Smart home decoration need to pay attention to what issues? How to install smart home?

Smart home as a sign of simple life, as people's lives become more and more busy, simple life has become one of the things people most want to do. But want to do smart home, its decoration designer is essential, good or bad decoration directly affects the use of smart home, so in the smart home decoration, we must take more thoughts, here are some smart home for the user Renovation needs attention.

Wiring easy to shield lines

The first thing to say is the wired smart home. This kind of smart home needs integrated wiring, wall sculpting, wall wiring, large amount of work, long construction period, dusty home, damaged environment, especially people. Unable to bear is that after the circuit is laid out, it cannot be changed again, resulting in poor mobility. In the future, it is impossible to upgrade and update the device. Therefore, Xiaobian recommends here that unless it is a new house, try not to install a wired smart home.

Three-point quality seven-point installation

Wired smart + home is very particular about the installation, a little carelessness directly affect the use of results and post-maintenance. For example, cables need to be tested before being embedded. Normal Category 5 twisted pairs or crystal heads transmit weak signals. A slight carelessness may affect the overall performance of network communications. If a network cable is used in multiple lines, It is necessary to untie the cables that are twisted together so that the twisting angle of the twisted pair will be destroyed, which will increase the value of the near-end crosstalk, and will have a great impact on the long-distance transmission speed and stability.

The disadvantages of integrated cabling are obvious. A little inattentiveness will cause major trouble for the latter part of the market. It has already withdrawn from the mainstream market and replaced by a new generation of wireless smart homes. It does not require wiring, automatic networking, and strong mobility. The first choice, but also has the characteristics of low cost, low power consumption, low complexity, two-way transmission, can automatically network, any additional equipment, plug and play. Meet the needs of people constantly upgrading and updating.