Public address systems typically use a highly reliable, dynamic, low- and medium-resistance type of heart that points to a dynamic microphone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone. Public address systems typically use a highly reliable, dynamic, low- and medium-resistance type of heart that points to a dynamic microphone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone. Public address systems typically use a highly reliable, dynamic, low- and medium-resistance type of heart that points to a dynamic microphone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone. Public address systems typically use a highly reliable, dynamic, low- and medium-resistance type of heart that points to a dynamic microphone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone. Public address systems typically use a highly reliable, dynamic, low- and medium-resistance type of heart that points to a dynamic microphone.
Capacitive microphones are extremely sensitive and clearly reproduce sound. The sound received in front has the largest gain. It can filter the noise from all around, which is very suitable for use in environments with a lot of background noise. We can understand that the directional microphone has different gains in all directions, the front is the largest, the sides are decreasing, and the rear is the smallest. In terms of electrical specifications, we call it a higher Fr ratio (Front to Random response index). In order to optimize the use of the microphone, you must first understand some of the microphone tips.
1. The best position of the speaker from the microphone is 15~40 cm.
If the distance is too close, the bass part of the speaker will be distorted due to excessive volume. If the distance is too close, it will produce a "near-field effect". The performance is that it adds too much bass, the speech is confusing, and the serious one is completely inaudible. But if the background noise is too large, sometimes you have to talk close to the microphone. At this time, a microphone that can attenuate the bass can be selected. The better microphone design has a built-in bass attenuation device, which can reduce the distortion caused by being too close to the microphone. If you don't have such a microphone, it is also helpful to compress the bass on the amplifier.
If the speaker must speak at a greater distance, the microphone will simultaneously record other sounds in the space, thus affecting the clarity of the speech. If the microphone is in the same room as the speaker, the sound from the speaker will be amplified by the microphone and repeated, and the situation will be even worse. In the end, echo whistling may occur.
2, the microphone should be aligned with the mouth, to the line.
Since the directional microphone receives the highest sensitivity from the linear direction, the speaker is best to align the microphone with the microphone to the line to avoid deterioration of the sound.
3. Try to keep a certain volume when speaking.
In the public address system, a volume limiter can also be used to protect the expander. The volume limiter helps the user to control the microphone output volume, avoiding sudden volume out of control, frightening the listener, or damaging the audio equipment.
The function of the volume limiter is not because the "correction" speaker is swaying, but to help the speaker convey the message to be conveyed in a clear and gentle tone.
Goldshell Miner:Goldshell Mini-DOGE Pro,Goldshell LT Lite,Goldshell X5,Goldshell LT5,Goldshell LT5 Pro,Goldshell LT6,Goldshell Mini-DOGE
Goldshell Miner is an industry-leading technology company. The company was founded in 2017, we are focusing on high-performance miners and application fields. In the past few years, Goldshell Miner has successfully completed the R&D, mass production, and sales of multiple miners in LTC, CKB, HNS, Sia and other cryptocurrencies. The headquartered is based in Shanghai, Goldshell Miner has offices in Hangzhou, Hong Kong, Singapore,etc. The current R&D personnel account for more than 70% of the company. The core team has more than 10 years of experience in the integrated circuit field. Aiming to become an excellent blockchain computing power provider, and promoting the development of the industry, Goldshell has established an efficient operation system from algorithm research, batch production and delivery, which based on a strong core team and excellent system capabilities. Goldshell continuously improved the computing performance and competitiveness of products, to provide high-performance and high-reliable computing infrastructure and services for the development of digital economy. Especially our household miner-BOX series, allow more customers to join in the market since our product are small, quiet, affordable, and friendly to beginners so that everyone could start mining at home.
goldshell mining machine,goldshell ltc miner,goldshel lt5,goldshell mini doge pro,goldshell lt6
Shenzhen YLHM Technology Co., Ltd. , https://www.ylhm-tech.com