15W 108 LED Outdoor Microwave Radar Motion Sensor Lamp Solar Garden Street Light

15W  108 LED Outdoor Security Solar Garden Street Light Microwave Radar Motion Sensor Solar Lamp 

Specifications:
 

Application Methods:
First, completely shut out the solar panels or put it down on the desttop. Then press the button for 5 seconds to start the lamp. 
5 hours before. Micro-mode + Induction mode
When someone comes, the radar sensor triggers circuit to start high light; the light will dim after someone leaving for 15 seconds.
 
After 5 hours, Induction mode
When someone comes, the radar sensor triggers circuit to start high light; the light will be turned off after someone leaving for 15 seconds.


Product Details:












Precautions:
1. Initial Setup: place the product under the sun, charging for several hours and then install to use.
2. Remove the battery when the product is not in use for a long time. Also charge up the battery every 3 months in order to ensure that the battery will not lose power and cause damage. Or charge the solar panel lamp at least once a month.
3. When the light flashes, it means the battery is low, you need to charge up the battery before it can be used.
4. Please install under the direct sunlight to ensure one day sunshine time is more than six hours, otherwise rainy day may not charge up the battery fully.
5. The solar panels charge up time will be affected by the length of sun light and weather conditions.
    The stronger sunlight, the faster charging time
    Charge less effectively in rainy days, so the lighting operation time is shorter.


Shipping
1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2. By Air or by Sea for bulk goods;
3. Customers specifying freight forwarders or negotiate shipping methods with us!
4. Delivery Time: 2-3 days for sample orders; 7-10 days for bulk orders.
 
FAQ:
Q1.Can I have a sample order for led light?
A:Yes, we welcome sample order to test and check quality.Mixed samples are acceptable.
Q2.What about the lead time?
A:Sample needs 1-2 days, moq production time needs 2-3 days, for order quantity more than MOQ please get back us and update.
Q3.Do you have any MOQ limited for solar motion led light order?
A:Low MOQ, 1pc for sample checking is available
Q4.How do you ship the goods and how long does it take to arrive us?
A:We usually ship by DHL, UPS, FedEx or TNT.It usually takes 3-5 days to arrive.Airline and sea shipping also optional.
Q5.How to proceed an order for solar motion led light?
A:We will arrange production after every details included payment terms, customers requirements, etc confirmed.For all details please contact our salesman with much more explanation.Thank you !
Q6.Is it OK to support customize requirement ?
A:Yes.Every details of your requirement, we will confirm with you before production.
Q7:What payment can protect my business?
A:We suggest you can select Trade Assurance on Alibaba.Com, and we can deal with that.
Q8:Warranty?
A:For this model, we support 1 year good quality warranty, the battery is available to replace.LED light over 50,000hrs.

Handwheel Encoder

The handheld addresser is used to program the address of the monitoring module offline. When in use, connect the two output wires of the handheld encoder to the communication bus terminal (terminal label 1, 2) of the monitoring module, turn on the black power switch on the right side upwards, and press "ten Add", [Subtract ten", [Add one place" and [Subtract one place" to program the address.

Motion Sensor Photocell Light Control,Sensor For Motion Control,Exterior Motion Sensor Control,Hollow Shaft Encoder

Changchun Guangxing Sensing Technology Co.LTD , https://www.gx-encoder.com