The hood allows us to inhale less fumes while working in the kitchen to better protect our health. However, many consumers are also plagued by many problems that come with them after purchasing the range hood. This time, Nail Technology reviewed the comments after purchasing a large number of smoking machines on the Internet and found that the user's spit on the range hood is concentrated in two aspects, one is installation, the other is the product itself, are you recruiting?
There are a series of spitting points in the installation.
For large appliances such as hoods, most consumers usually rely on after-sales installation services provided by merchants.
After reviewing a lot of after-sales comments, Nail Technology found that the user's spit was quite dense in the installation of the hood.
First, the installation is expensive, and there is even a phenomenon of “disorderly chargingâ€.
In fact, not only the hood, but also all the major electrical appliances that need to be installed have such problems - the subsequent installation costs are high. I believe that many families have encountered such a thing, and the Internet is also a common occurrence. It can also be said to be one of the most negative evaluations.
Many consumers report that the accessories are too expensive, and some people think that this is the manufacturer's "disorderly charges", allowing customers to consume twice. For an ordinary range hood, the price is usually only one or two thousand dollars. If it is under the premise of "free installation", it will charge a few hundred yuan for the installation fee. It must be said that this is a bit unacceptable.
Nail Technology recommends that some manufacturers need to install the mains products, the materials outside the box are subject to additional charges, which requires consumers to understand the product packaging list, what additional installation costs, etc. before purchase.
In addition, if the user wants to install more cost-effectively, it is recommended that the accessories that may be used during the installation be prepared in advance. For example, the accessories purchased from hardware stores and other channels should be cheaper, and try not to install the installers. Indiscriminate charging can take advantage of the opportunity.
Second, the installer's attitude is not good, the professional skills are not enough, or the installation is negligent.
In the various feedbacks of users, the proportion of dissatisfied with the follow-up service of the hood is also quite high, such as installation and dismissal, the installer is not responsible, and the attitude is poor. In addition, some users report that the installer's technology is not professional or negligent when installing.
From the current after-sales service of home appliance companies, especially the installation services of large-scale home appliances, there is no strict unified standard for the whole, and the enterprises are not the same. At the same time, the company's professional technical training and management for after-sales installers are loose.
Nail technology recommendations: big brands tend to pay more attention to after-sales service and user reputation, relatively more reliable, consumers can make appropriate choices according to their own preferences. Of course, even a big brand can hardly achieve a perfect service without any dead ends. Consumers can also refer to the user evaluation of the product when purchasing.
In addition, because the user's housing design and flue design are different, and different hoods are not designed the same when they are shipped from the factory, they often have special size requirements. This requires consumers to confirm the installation size, installation requirements, etc. with the manufacturer before purchasing to ensure that the installer can install properly and avoid unnecessary losses.
In addition, during the installation process, the user should supervise on site to avoid inadvertent installation of the installer. At the same time, after the installation is completed, the actual test should also be carried out, and if there is any problem, solve it in time.
There is a problem with the product itself
From the user feedback observed by Nail Technology, the evaluation that reflects the problem of the product itself is less than the installation. However, the strict quality inspection does not rule out the existence of some fish that have leaked nets. It is indeed possible for users to buy products with poor quality. In addition, the brand of hoods on the market is mixed, which also provides a breeding space for inferior goods.
Nail Technology noted that users' focus on the hood product itself is mainly focused on small suction, poor smoke extraction and poor quality.
In fact, many of the hood products on the market today are quite elaborate from the shape design to the internal technology.
Whether it is in workmanship, quality, or in the effect of smoke exhaustion, there has been a very significant improvement over the past. However, if the user has various unsatisfactory conditions during use, in addition to the problems that may occur when the product itself is produced, some accidental bumps that occur during the process of shipping and transportation may also cause the malfunction of the range hood. , causing problems in actual use.
In addition, the "inaction" of the after-sales installer mentioned above may also cause the hood to appear in a situation similar to the inability to properly exhaust smoke.
Nail Technology Suggestion: If the user uses it soon, it will find that the hood product has quality problems such as switch and button splitting. You can contact the manufacturer or e-commerce customer service staff at the first time to request replacement or replenish related accessories to seek the best. s solution. In addition, be sure to polish your eyes when you purchase, don't be fooled by fakes, low prices, etc., rather spend more time when you pick, don't buy it and regret it.
For some users, the similar suction force is too small, and the smoke exhaustion effect is poor, which leads to the problem of full house soot. Nail Technology recommends that consumers pay attention to the parameters of the product during the purchase, especially the suction, grease separation, etc. Several indicators.
If the user's own cooking has the "heavy taste" characteristics such as heavy oil, it is recommended to purchase a range hood with a large exhaust volume and high grease separation. And if users want to get rid of the heavy chores of hood cleaning, they may choose steam scouring and no-cleaning hood products. Simply put, users still need to purchase products according to their actual needs.
In summary, we should be more careful and more communication when purchasing, try to understand the relevant situation of products and after-sales, and try to avoid these pits based on their own needs.
Somke Machine
Fog Smoke Machine
Feature:
* DURABLE MATERIAL: It is made of top grade aluminum alloy, built-in fan for heat dissipation, stable and lightweight. Look upscale and durable for long time.
* BEAUTIFUL COLOR SHOW: It can choose single colors or color combinations. It will be great enjoyment to see the colorful light projected to the ceiling, wall and floor,etc.
* SUIT FOR VARIOUS OCCASION: Suit for various parties, birthday, dance, holiday, celebrations, Karaoke, family or friend home celebration. The laser light can be used in home, disco, living room, bar, club, or anywhere needed.
* EASY OPERATION: The light will enter sound activated mode, which makes the lights blink according to the beat of the music or sound. Adjustable motion speed.
* CREAT ATMOSPHERE EVERYWHERE: This laser light is mini size with tripod, portable and convenient for carry. You can place it everywhere.
Our company have 13 years experience of LED Display and Stage Lights , our company mainly produce Indoor Rental LED Display, Outdoor Rental LED Display, Transparent LED Display,Indoor Fixed Indoor LED Display, Outdoor Fixed LED Display, Poster LED Display , Dance LED Display ... In additional, we also produce stage lights, such as beam lights Series, moving head lights Series, LED Par Light Series and son on..
Somke Machine Series,Smoke Machine,Wedding Smoke Machine,Smoke Machine Party
Guangzhou Chengwen Photoelectric Technology co.,ltd , https://www.cwledpanel.com