The advantages of LED fluorescent lamps:
1. Environmentally friendly lamps
Traditional fluorescent lamps contain a lot of mercury vapor, which can be volatilized into the atmosphere if it is broken. However, LED fluorescent lamps do not use mercury, and LED products do not contain lead, which has a maintenance effect on the environment. LED fluorescent lamps are recognized as green lighting in the 21st century.
2. Less fever
Traditional luminaires generate a lot of heat, while LED luminaires convert all electrical energy into light energy, which does not waste energy. And for documents, clothing will not fade.
3. No noise
LED lamps do not generate noise, and are ideal for applications where fine electronic instruments are used. Suitable for libraries, units and the like.
4. Maintain eyes
Conventional fluorescent lamps use alternating current, so 100-120 strobes occur every second. LED fluorescent lamp adopts LED constant current operation, which converts AC power directly into DC power, which can reduce LED light decay, launch fast, no flicker, and maintain both eyes.
Scope of application:
1. Supermarket shopping malls: Large-scale use of LED fluorescent tubes saves more than 60%, plus long life, greatly reducing operating costs.
2. Factory production line and warehouse: no maintenance is required. Compared with traditional fluorescent tubes, it is a kind of maintenance for the eyes and body of the employees.
3. Hospital, campus, office building: safe and reliable, no flicker, soft and pure light, useful to reduce visual fatigue and maintain eyes.
4. Cold storage freezer: no infrared, no heat. The product does not generate heat under the illumination of the light source, and does not change due to heat.
LED high-power bulb (energy-saving lamp) : light effect is higher than incandescent lamp, ordinary fluorescent lamp is effective: 30Im/W, energy-saving lamp: 50-60Im/W, life ratio is determined in production technology, usually at 1000- Within 3,000 hours, more than 3,000 hours are of high quality.
LED lights : The light effect is not currently high, and now the level can only be 30Im/W up and down, which is also super bright. However, the lamp is the development direction of the lamp manufacturing operation, and the theoretical value of the light effect can reach 80Im/W or more, and the 100Im/Wr record is also broken. The primary advantage of this lamp is the number of life. Because it does not need gas, no filament, no traditional glass data, it is a semiconductor solid lamp with a life of more than 100,000 hours.
LED high-power bulb : the production process is simple, the commodity is traditional, so the price is low, but the light effect is low, the first rely on the tungsten filament electrothermal conversion light, the light effect can only reach 10Im/W. The primary resolution of the life is the degree of transpiration of the tungsten wire, usually no more than 1500 hours.
PCB bus slot edge card sol: 1.27mm, 2.54mm, 3.175mm, 3.96mm, 90 degree, 180 degree dip plug-in board, SMT board, press type, welding type, ear, long pin series.
PCB bus slot edge card sol: 1.27mm, 2.54mm, 3.175mm, 3.96mm, 90 degree, 180 degree dip plug-in board, SMT board, press type, welding type, ear, long pin series
EDGE CARD SOLT
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com