Calibration of electronic crane scales - Huaqiang Electronic Network

Calibration of the electronic crane scale:

Crane scale

It has been calibrated with the standard weight at the factory (if there is no hoisting scale, we can provide free on-site service to help you calibrate the scale, until the completion of the school (to get your satisfaction), you need to re-calibrate, you can contact the local metrology department

,

You can also contact the factory or our authorized agent, please do not adjust it yourself.

The calibration method is as follows

:
1. There are standard objects (the weight is at least half of the scale tonnage, such as the standard weight of the 5T scale is at least 2.5T):

a, set the scale of the electronic scale to "1"

b. Hang the wire rope and then “zero”

c. Hang up the standard object; press the set button once; press the number key “5” to “weight calibration” option; press the F2 key to “calibrate” option; enter the password; enter the weight value of the standard after “please input” ( If the standard is 1 ton, enter 1000Kg)

d, confirm

e, return

f. Re-adjust the scale value to the standard value. (such as 5T electronic scale standard division value is 2Kg)
2, there is no standard situation

First, find a standard scale and weigh out a batch of goods, record the weight of the goods weighed in the standard scale, and then perform the calibration in the same step, which has achieved the purpose of accurate weighing.