Daily maintenance of CNC lathes - Solutions - Huaqiang Electronic Network

PESD1CAN electrostatic protection SOT23-3 24V two-way

SMD aluminum electrolytic capacitor

1. Clean and lubricate the surface of each rail every day. Machines with automatic lubrication system should regularly check and clean the automatic lubrication system, check the oil quantity, add lubricating oil in time, check whether the oil pump starts to start oiling and stop.
2. Check the spindle head automatic lubrication system for normal operation every day, and replace the spindle box lubricant regularly.
3. Pay attention to check whether the cooling fan in the electrical cabinet is working properly, whether the air duct filter is blocked or not, and clean the contaminated dust.
4. Pay attention to check the cooling system, check the liquid level, add oil or water in time, and replace it when the oil and water are dirty.
5. Pay attention to check the spindle drive belt and adjust the tightness.
6. Pay attention to check the tightness of the rail strip and adjust the gap.
7. Pay attention to check whether the oil pump of the hydraulic system of the machine tool system has abnormal noise, whether the working oil level is suitable, whether the pressure gauge indicates normal, and whether the pipeline and each joint are leaking.
8. Pay attention to check whether the guide rail and machine tool cover are complete and effective.
9. Pay attention to check the mechanical precision of each moving part and reduce the shape and position deviation.
10. Every day after work, clean the machine, clean the iron filings, wipe the coolant on the rails, and prevent the rails from rusting.