Circuit function and advantage
This circuit shows how to use the precision analog microcontroller ADuCM360/ADuCM361 in precision thermocouple temperature monitoring applications. ADuCM360/ADuCM361 integrates dual 24-bit-to-analog-to-digital converter (ADC), dual programmable current source, 12-bit digital-to-analog converter (DAC), 1.2 V internal reference, ARM Cortex-M3 core, 126 kB Flash, 8 kB SRAM, and various digital peripherals such as UART, timer, SPI, and I2C interface.
In this circuit, the ADuCM360/ADuCM361 is connected to a thermocouple and a 100 platinum resistance temperature detector (RTD). The RTD is used to perform cold junction compensation.
In the source code, the ADC sampling rate is chosen to be 4 Hz. When the ADC input programmable gain amplifier (PGA) has a gain configuration of 32, the ADuCM360/ADuCM361 has a noise-free code resolution greater than 18 bits.
Figure 1. ADuCM360/ADuCM361 is used as a temperature monitoring controller and thermocouple interface (schematic diagram, not shown) 
Ethernet cables connect devices such as PCs, routers, and switches within a local area network.Most technicians refer to these standards as CAT5 and CAT6, respectively. Also CAT3 available. Because of this, many online stores that sell network cables use this abbreviated language as well.
The connector can by shield or non-shield type, raw cable can be UTP, STP, FTP type. Also the molded shape can be custom mould by straight, right-angle, 105 degree, etc.
These physical cables are limited by length and durability. If a network cable is too long or of poor quality, it won't carry a good network signal. These limits are one reason there are different types of Ethernet cables that are optimized to perform certain tasks in specific situations.
Ethernet Cable Wiring,RJ45 cable,networking cable,8P8C cable
ETOP WIREHARNESS LIMITED , https://www.oemmoldedcables.com