iPhone7 has been on sale for more than a month, and many people have also received their own orders for the apple to be eaten. It is said that one of Apple’s most abused points is to cancel the 3.5mm headphone jack, and the original conversion line is small. The poor DAC has also seriously affected the need to transfer higher-quality headphones.
Early sharing of a portable wire-controlled amp from Japan's ELECOM at Zhang Ama's home could better solve the pain points of the iPhone 7's connection to high-quality headphones. However, only one lightning interface of the 7th generation can't be heard if it is used for charging. How can it be broken? Only to turn to Bluetooth, knowing that it is forced helpless
If you are still dedicated to listening to music on the cable, how safe is it for sound quality? You can click on the previous article to refer to.
MUC-M2BT1 is already the second generation Bluetooth upgrade line launched by Sodafa. Compared with the previous generation, the second generation's life time was 7.5 hours, which greatly surpassed the poor 4.5 hours of the former, which greatly improved the practicality of wireless listening songs. No one wanted to have a short-distance high-speed rail that had not arrived yet and was already dead. awkward.
The Bluetooth specification has been upgraded to 4.1, which is higher than the Bluetooth 3.0 of the previous generation, and has added support for Sony's unique LDAC wireless Bluetooth audio transmission standard, which has improved the code rate of the lossless audio transmission for wireless transmission. This is a concern for audiophiles. It is very important. In short, the practical value of MUC-M2BT1 has been significantly improved compared with the previous generation, which is why the initial generation did not consider picking up.
Speaking of this, what kind of headset can this Bluetooth line upgrade? The wire uses the MMCX standard jack and can support most of the high-quality, changeable headphones. This standard has already begun to spread. The XFA-Z5, XBA-N3, XBA-A3, XBA-A2, XBA-H3, Both XBA-H2 and XBA-300AP can be wirelessly upgraded through the MUC-M2BT1.
Quickly tear the packaging film and see how it's inside
The physical appearance of the Bluetooth upgrade cable can be hung on the neck like a "collar"?
Remove the upper layer of the storage upgrade line, which comes with manuals and warranty cards.
There is also a universal charging cable for the root and general Android phones, so this line was read and recaptured.
The conscience of Dafa comes with a big bag with a LOGO.
Looked at the labeling on the upgrade line. The origin is from Malaysia. Many audio products such as headphones and players from Dafa come from here.
The Bluetooth upgrade line already has some power, and it is used for the first time.
With the Dafa ZX100, the standard for wirelessly transmitting audio was manually switched to the LDAC (Optimized for sound quality) option. Note that this needs to be set before the connection can take effect.
With NFC really easy, two logo kiss first
The ZX100 interface will prompt whether to connect, select "yes".
It appeared on the connected model.
In a matter of seconds, the interface for successful connection is displayed.
After successful pairing, you do not need to pair again.
Take out Sony's XBA-Z5 earbuds, the color of the wire, you can distinguish between the LR end, where the red represents the R end.
Very simple and lightly inserted, a Bluetooth headset is DIY.
Selecting Michael Jackson's "billie jean" to audition this "Bluetooth" combination, can clearly feel that the low-frequency volume still maintains the XBA-Z5's sense of use of the original line, dive into place, only a few of the details of the music analysis Subtle defects, if not carefully contrasted, are hard to detect.
Of course, even if the ZX100 uses the original line to push the XBA-Z5 directly, there are still some shortcomings. Due to the limitations of front-end thrust, the earplugs have a bit of noise, and they cannot fully demonstrate the quality of the XBA-Z5 flagship positioning earbud. The upgrade line is just a change in the transmission method, and does not improve the sound quality.
The beginning mentioned that the iPhone 7 removed the inconvenience caused by the headphone jack and tried to pair it with Dafa's Bluetooth upgrade line.
The APP for the iPhone music player recommends "ELECOM Hi-Res Music Player". The advantage is that even if it is not used with ELECOM, the amp can be used free of charge to achieve decoding of the Hi-Res sound source.
The feeling of listening at first glance, though adopted by the Bluetooth method, can be felt much better than using the original conversion line of Apple's original device. This is even the common fungus can be felt. At least the strength of the voice has improved a lot and it has been more vigorous and vigorous.
In the blink of an eye is almost to the end, in short, the second-generation Bluetooth upgrade line of Dafa's MUC-M2BT1 changed the individual’s previous contempt for listening to high-quality headphones via Bluetooth, although there is still a certain distance from the fevered wire, but more Time is just a friend who listens to music with network cloud music. The maximum capacity of a song is less than 30M. The issue of insufficient code rate for transmission has actually been solved.
As a series of articles, the next plan will be to share with Zhang Aunt's members XD, and to learn more about different brands of different models of plugs, audio equipment on the sound quality, comparison experience, the code is not easy, I hope everyone will give a lot of rewards to power next time to see you .