Lunar New Year has entered the fierce competition, "a step away", "take wisdom Tiger Mountain 3D" and other films have been released one after another. At this time, the National Film Bureau of the State Press, Publication, Radio, Film and Television released a “Notice on Further Enhancing the Quality of Screeningâ€. The notice stated that it has been found that some theaters have experienced quality problems during the screening process and that they must pay more attention to rectifying the phenomenon of non-compliance. , improve screening quality.
From “Tai Ping Lun (Part 1)†released on December 2th, many popular films have met with the audience one after another, and most of them are 3D versions. “One Step away†and “Taking Tiger Mountain 3D†all have 3D and giants. The screen format, this kind of high-tech format video, is particularly important for the screen brightness and sound effects.
This time, the Film Bureau issued a notice clearly stating that a problem was found in the investigation of the quality of the film screening. The original stated: “There are problems with the quality of screening of some movie theaters, mainly because the screen brightness and sound pressure level cannot meet the technical standards. As a result, moviegoers have many reports and complaints."
In response to this problem, the Film Bureau requires that all cinema lines and theaters must attach great importance to the quality of screenings and must not reduce the screening standards of the films for any reason; at the same time, the company must organize special personnel to conduct screening quality surveys to promptly correct screening quality. The phenomenon of reaching the standard; moreover, the Film Bureau will also jointly unite the provincial radio and television department and the China Film Distribution Association to conduct spot inspections on the quality of the screenings, publicly expose the theaters with quality problems and handle them in accordance with relevant laws and regulations; The Screening Association will set up a film screening quality report telephone on the website of the association and consciously accept social supervision.
What is Battery Holder?
Battery Holders are devices used to hold and secure batteries in electronic devices. They come in various shapes and sizes, depending on the type and size of the battery they are designed to hold. Battery holders are typically made from plastic or metal materials and feature spring-loaded contacts that connect to the battery terminals to provide power to the device. They are commonly used in electronic devices such as toys, remote controls, flashlights, and other portable devices that require batteries for power. Battery holders are essential components in electronic devices, as they ensure that the batteries are held securely in place and provide a reliable source of power for the device.
Choosing the right Battery Holder.
The kind of battery holder required depends on the below factors:
Size of the batteries being used (AAA, AA, C, D, etc.)
Number of cells being used
Compatibility of the cells being used with the battery holder
Contact and terminal style
Most battery holders are specifically manufactured for a particular type of batteries. However, many battery holders will be compatible with similar batteries with different chemistries. One point to note here is that if a battery holder houses batteries of different chemistries at the same time, the power being delivered will be in line with the weakest battery. Hence, using batteries with the same chemistry is advisable for optimum performance.
Types of Battery Holder Mounts.
The way the battery holder is attached to the cell-powered device is known as the battery holder mount. The different types of battery mounts are:
Panel Mount:
A panel mount battery holder is a separate compartment designed to hold cells. It can be inserted into a cavity in the device that needs power. It can be removed when the batteries need to be changed. They are inserted in the device cavity by screwing in or have Flange Panels.
Slide-In Mount:
In this type of mount, the cells are inserted and removed by sliding in or out. They are the most commonly used mounts and also economical. When a cell is slid in place, it is held by a cover or by the opposing force of two terminals. This type of mount is quite reliable, too.
Chassis Mount:
This type of mount is fixed inside the main body of the device to a surface plate. These mounts come in plastic as well as metal.
PCB Mount:
As the name suggests, the PCB Mount is for when the battery needs to be on a PCB. It has sharp pins around the perimeter which can be used to fix it on a PCB. Usually, they are used to hold coin cells. However, PCB mounts are also made for AAA or AA cells.
Strap & Lead:
They are not entire housing units, but make it possible to attach a battery to an electronic device or holder. It just has a wire and two press studs to hold a cell. Replacement of the cell becomes easy in this method.
Snap-In Mount:
It consists of tensioned metal clips to hold a cell securely in place. The battery is to be pushed into the housing until it snaps in place. This type of mount is best suited for systems prone to shocks and vibrations.
Wire Lead Mount:
This type of mount provides a good level of flexibility in terms of the places where it can be used. It has two wire leads at one end while the other end can be fixed to the device being powered.
Surface Mount:
This type of mount is usually used for coin cells. It lies flat inside the device or within a circuit. It is open-faced and has button terminal contacts.
Through-Hole Surface Mount:
This is best suited to hold batteries where space is a constraint. Instead of being inserted into a cavity in a device, it is fixed on the surface of the device through holes.
Battery holders are often not taken seriously enough when designing systems. However, a reliable battery holder is an important component that contributes to the reliability of the entire system.
Battery Hoders, Battery Case, Battery Socket, Battery Clips, Coin Cell Battery Holder
ATKCONN ELECTRONICS CO., LTD , https://www.atkconn.com