I have recently received inquiries from many friends. The general idea is to install Xiaomi’s smart home system. What should I pay attention to when decorating? I have summarized the following points, which can be regarded as a centralized answer for your reference:
1. The electric curtain controller uses a 220V power supply, so there needs to be a power socket near both ends of the track (the total length is less than 6 meters). It is recommended to leave a socket at each end of the curtain track over 6 meters. Reserve not less than 20cm for single-track curtain track grooves, and not less than 30cm for double-track curtains.
2. The wall panel of Xiaomi Smart Home supports up to two switches. It is recommended not to use switches with three switches and above. If you have already used a three-way or above wall switch, it is recommended to properly merge or split a new junction box, as shown in the figure below.
3. The camera is generally installed at a higher position close to the ceiling. It is recommended to leave a higher socket nearby, preferably 5-20cm away from the ceiling.
4. It is recommended to use a stable and reliable zero live wire solution for all wall switches, so all wall switches need to reserve a neutral wire when installing or modifying electricity. If it is really inconvenient to reserve the neutral line, choose a lamp above 10W when choosing a lamp, and the maximum power does not exceed 800W.
5. The smart wall switch can form a dual-control switch with the wall-mounted wireless switch, and there is no need to route the dual-control switch in the early stage. If there is already a wiring for the dual control switch, don’t bother about it. You can directly close any 86 cassette in the later stage, and you need to short the live wire and any control wire of the cassette before closing.
6. The power cord of the natural gas alarm is 1.5 meters long, and a socket is needed nearby. The gas alarm should not be installed directly above the stove. It is recommended to install it on the ceiling or wall above the side, 1~4 meters away from the position of the gas stove.
7. Mijia Gateway and Xiao Ai need to occupy a socket. If the socket is tight, it is recommended to reserve it.
8. Keep power and water supply near the Mi Water Purifier.
As long as the above is done, there will be no problem when installing Xiaomi's smart home system later. Of course, there are many products that support Mijia, especially various electrical appliances. Different electrical appliances have different requirements for installation conditions. This article only lists some common electrical appliances. If you consider using others, you can refer to the manual to make relevant preparations.
Ring And Fork Type Insulated Terminals
Ring And Fork Type Insulated Terminals,High quality insulated terminal,copper tube terminal
Taixing Longyi Terminals Co.,Ltd. , https://www.longyiterminals.com